Gigabyte MZ72-HB2 - 2-2-17 Broadcom BCM57416 10 GBASE-T Network Connection

- 57 -
BIOS Setup
2-2-17 Broadcom BCM57416 10GBASE-T Network Connection
Parameter Description
Firmware Image Menu
Press[Enter]toviewrmwareimageinformation.
DeviceCongurationMenu
Press[Enter]tocongureadvanceditems.

Multi-Function Mode
– CongurestheNICHardwareMode.
– Options available: SF, NPAR 1.0. Default setting is SF.

Number of VFs Per PF
– ConguresthenumberofVirtualFunctionsPerPhysicalFunctionin
multiplesof8(1-128).ThiseldisonlyapplicablewhenSR-IOVis
enabled.
– Default setting is 8.

SR-IOV
– Enable/Disable Single Root I/O Virtualization.
– Options available: Enabled, Disabled. Default setting is Enabled.

Number of MSI-X Vectors per VF
– ConguresthenumberofMSI-XVectorsperVF(0-128).
– Default setting is 4.

Maximum Number of PF MSI-X Vectors
– ConguresthemaximumnumberofPFMSI-XVectors(0-512per
controller).
– Default setting is 74.