EasyManua.ls Logo

Gigabyte R152-Z30 - MAC Ipv4 Network Configuration

Gigabyte R152-Z30
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 54 - BIOS Setup
5-2-20 MAC IPv4 Network Conguration
Parameter Description
Congured
Indicates whether network address is congured successfully or not.
Options available: Enabled/Disabled. Default setting is Disabled.
Enable DHCP
(Note)
Options available: Enabled/Disabled. Default setting is Enabled.
Local IP Address
(Note)
Press [Enter] to congure local IP address.
Local NetMask
(Note)
Press [Enter] to congure local NetMask.
Local Gateway
(Note)
Press [Enter] to congure local Gateway
Local DNS Servers
(Note)
Press [Enter] to congure local DNS servers
Save Changes and Exit Press [Enter] to save all congurations.
(Note) This item appears when Congured is set to Enabled.

Table of Contents

Other manuals for Gigabyte R152-Z30

Related product manuals