- 19 - System Appearance
2-4 Front Panel LEDs and Buttons
L1
L2
1
3
5
7
2
4
6
8
No. Name Color Status Description
1.
Reset Button -- -- Press this button to reset the system.
2.
NMI button -- --
Press this button for the server to generate a NMI to the
processor. If multiple-bit ECC errors occur, the server will
effectively be halted.
3.
Power button
with LED
Green On Indicates the system is powered on.
Green Blink System is in ACPI S1 state (sleep mode).
N/A Off
- System is not powered on or in ACPI S5 state (power
off)
- System is in ACPI S4 state (hibernate mode)
4.
ID Button
with LED
This LED represents the RoT function LED behavior.
Please see the following section for detail LED behavior.
5.
HDD Status
LED
Green
On
Indicates locating the HDD.
Blink
Indicates accessing the HDD.
Amber On
Indicates HDD error.
Green/
Amber
Blink
Indicates HDD rebuilding.
N/A Off
Indicates no HDD access or no HDD error.
6.
System
Status LED
This LED represents the RoT function LED behavior.
Please see the following section for detail LED behavior.
To Next Page
Loading...
