Gigabyte R262-ZA0 - Rot Leds

- 21 - System Appearance
LED on Front panel
(Note5)
ID LED Status LED
EC Firmware (FW) Authentication fail or not exit
EC FW is broken or not exit
(Note1)
OFF OFF
Authenticating/Recovering BMC/BIOS Images
Authenticating Images
OFF OFF
Recovering BMC Active Flash
Blinks Blue
4 times per
second
Blinks Green
4 times per
second
Recovering BIOS Active Flash
Blinks Blue
4 times per
second
Blinks Green
4 times per
second
Authentication (AUTH) Pass
Recovering BIOS Active Flash
OFF OFF
BMC : AUTH pass after doing recovery
BIOS : AUTH pass after doing recovery
OFF OFF
BMC : AUTH pass after doing recovery
BIOS : AUTH pass
OFF OFF
BMC : AUTH pass
BIOS : AUTH pass after doing recovery
OFF OFF
2-5 RoT LEDs
L1
L2
Status LED
ID LED