Gigabyte R262-ZA0 - Page 75

- 59 - BIOS Setup
(Note1) This section is dependent on the available PCIe Slot.
(Note2) This section is dependent on the available OCP connector.
(Note3) This section is dependent on the available LAN controller.
Parameter
Description
PCI Bus Driver Version
Displays the PCI Bus Driver version information.
SLOT_#
(Note1)
Lanes Conguration
Change the PCIe lanes.
Options available: Disabled, Auto, x16, x8x8, x8x4x4, x4x4x8,
x4x4x4x4. Default setting is Auto.
SLOT Express Slot # I/O ROM
(Note1)
When enabled, this setting will initialize the device expansion ROM
for the related PCI-E slot.
Options available: Enabled/Disabled. Default setting is Enabled.
OCP#
(Note2)
Lanes
Change mezzanine PCIe lanes.
Options available: Auto, x16, x8x8, x8x4x4, x4x4x8, x4x4x4x4,
Disabled. Default setting is Auto.
OCP#
(Note2)
I/O ROM
When enabled, this setting will initialize the device expansion ROM
for the related U.2 device.
Options available: Enabled/Disabled. Default setting is Enabled.
OCP#
(Note2)
Max Link Speed
Congure mezzanine PCIe max link speed.
Options available: Auto/Maximum/Gen1/Gen2/Gen3.
Default setting is Auto.
Onboard LAN Controller
(Note3)
Enable/Disable the onboard LAN devices.
Options available: Enabled/Disabled. Default setting is Enabled.
Onboard LAN I/O ROM
(Note3)
Enable/Disable the onboard LAN devices, and initializes device
expansion ROM.
Options available: Enabled/Disabled. Default setting is Enabled.
PCI Devices Common Settings
Above 4G Decoding
Enable/Disable memory mapped I/O to 4GB or greater address
space (Above 4G Decoding).
Options available: Enabled/Disabled. Default setting is Enabled.
SR-IOV Support
If the system has SR-IOV capable PCIe devices, this item Enable/
Disable Single Root IO Virtualization Support.
Options available: Enabled/Disabled. Default setting is Enabled.