Hardware Installation - 12 -
Front Panel
LED/Buttons
2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x NMI button
1 x Reset button
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED
Rear Panel I/O 3 x USB 3.0
1 x VGA
1 x COM
2 x RJ45
1 x MLAN
1 x ID button with LED
Backplane I/O
(R272-Z30)
Front side_CBP20C4: 12 x SATA/SAS ports
Rear side_CBP2021: 2 x SATA/SAS ports
Speed and bandwidth: SATA 6Gb/s or SAS 12Gb/s per port
(R272-Z31) Front side_CBP20O5: 24 x SATA/SAS ports
Rear side_CBP2021: 2 x SATA/SAS ports
Speed and bandwidth: SATA 6Gb/s or SAS 12Gb/s per port
(R272-Z32) Front side_CBP20O5: 24 x NVMe ports
Rear side_CBP2021: 2 x SATA/SAS ports
Speed and bandwidth: PCIe Gen3 x4 per port
TPM 1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010
To Next Page
Loading...
