Gigabyte R272-Z34 User Manual

R272-Z34
AMD EPYC™ 7002 UP Server System - 2U 26-Bay Gen4 NVMe
User Manual
Rev. 1.0

Gigabyte R272-Z34 Specifications

General

Brand	Gigabyte
Model	R272-Z34
Category	Server
Language	English

Summary

Server Safety and Operational Warnings

Critical Server Safety Precautions

Crucial safety warnings and precautions for server installation and operation.

Electrostatic Discharge (ESD) Protection

ESD Handling and Prevention

Procedures for safely handling electronic components to prevent ESD damage.

Chapter 1 Hardware Installation

1-1 Installation Precautions

Essential safety and preparation steps before installing hardware components.

1-2 Product Specifications

Detailed technical specifications of the server system and its components.

Chapter 2 System Appearance

Chapter 3 System Hardware Installation

Pre-installation Instructions

General safety instructions and precautions before starting hardware installation.

3-2 Removing and Installing the CPU and Heat Sink

Instructions for safely installing and removing the CPU and its associated heat sink.

3-3 Removing and Installing Memory

Procedures for installing DDR4 memory modules, including eight-channel configuration.

3-4 Removing and Installing the PCI Expansion Card

Steps for installing a PCI expansion card into the server's expansion slots.

3-5 Removing and Installing the Hard Disk Drive

3-7 Removing and Installing the Power Supply

Chapter 4 Motherboard Components

Chapter 5 BIOS Setup

5-2 Advanced Menu

5-3 AMD CBS Menu

5-4 AMD PBS Menu

5-6 Server Management Menu

5-7 Security Menu

Introduction to the Security menu for setting up system access passwords.

5-8 Boot Menu

Settings for configuring the system's boot order and boot mode.

5-9 Save & Exit Menu

5-10 ABL POST Codes

List of ABL POST codes for various system initialization and test points.

5-11 Agesa POST Codes

List of Agesa POST codes for different modules and initialization stages.