- 13 - Hardware Installation
Expansion Slot
Riser Card CRS2014:
1 x PCIe x16 slot (Gen4 x16), FHFL
Riser Card CRS2026:
2 x PCIe x16 slot (Gen4 x16), FHFL
Riser Card CRS2026:
1 x PCIe x16 slot (Gen4 x16), FHFL
- 1 x PCIe x16 slot (Gen4 x16); Occupied by CNV3134, 4 x NVMe Gen4
HBA
1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0
Supported NCSI function
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth (Type1, P1, P2)
Supported NCSI function
1 x M.2 slot:
M-key
PCIe Gen4 x4
Supports NGFF-2242/2260/2280/22110 cards
CPU TDP is limited to 225W if using M.2 device
NOTE: Support is not provided for mixed GPU populations
Storage
Total 12 x 3.5"/2.5" SATA/SAS/Gen4 NVMe hot-swappable HDD/SSD bays
8 x SATA/SAS ports, 4 x SATA/Gen4 NVMe hybrid ports
NOTE: SAS card is required for SAS devices support
Internal I/O
1 x M.2 slot
1 x USB 3.0 header
1 x COM header
1 x TPM header
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
To Next Page
Loading...
