Need help?Do you have a question about the Gigabyte R281-Z91 and is the answer not in the manual?
General| Socket | SP3 |
|---|---|
| Memory Type | DDR4 |
| RAID Support | RAID 0, 1, 10 |
| Form Factor | Rack |
| CPU | AMD EPYC |
| Chipset | AMD EPYC |
| Memory Slots | 16 |
| Maximum Memory | 2TB |
| M.2 | 2 x M.2 slots |
| SATA | 8 x SATA 6Gb/s |
| Networking | 2 x 10GbE LAN (Intel X550-AT2) |
| Storage Interface | SATA, SAS, M.2 |
| USB Ports | 2 x USB 3.0 ports (rear) 2 x USB 3.0 ports (front) |
Details critical warnings before installing and operating the server.
Guidelines for preventing damage from electrostatic discharge when handling components.
Describes the front panel layout and components.
Details the rear panel connectors and ports.
Explains the function of front panel LEDs and buttons.
Describes the status indicators for rear system LAN ports.
Explains the LEDs for hard disk drive status.
Details the status indicators for the power supply unit.
Step-by-step guide for removing and installing the system cover.
Instructions for removing and installing the internal fan duct.
Detailed procedure for CPU and heat sink installation or removal.
Guide for installing and removing RAM modules.
Procedure for installing or removing PCI expansion cards.
Steps for installing and removing hard disk drives.
Instructions for installing and removing M.2 SSDs.
Guide on how to replace the server's fan assembly.
Procedure for replacing the server's power supply unit.
Illustrates cable routing for internal components.
Identifies and describes key components on the motherboard.
Explains the function and configuration of motherboard jumpers.
Overview of the main BIOS setup screen and options.
Access to advanced hardware configuration options within BIOS.
CPU-related configuration options for AMD processors.
Submenu options for configuring North Bridge and other chipset functions.
Configuration for server-specific management features and logs.
Options for setting administrator and user passwords for system access.
Setting the drive priority for system boot-up.
Lists ABL POST codes for system diagnostics.
Procedure to restore the BIOS using embedded recovery techniques.
To Next Page