EasyManua.ls Logo

Gigabyte R281-Z91 - PCI Subsystem Settings

Gigabyte R281-Z91
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 75 - BIOS Setup
5-2-9 PCI Subsystem Settings
PCI Bus Driver Version
Displays the PCI Bus Driver version information.
PCI Devices Common Settings:
PCI Latency Timer
Sets the value to be programmed into PCI Latency Timer Register.
Options available: 32 PCI Bus Clocks/64 PCI Bus Clocks/96 PCI Bus Clocks/128 PCI Bus Clocks/160
PCI Bus Clocks/192 PCI Bus Clocks/224 PCI Bus Clocks/248 PCI Bus Clocks.
Default setting is 32 PCI Bus Clocks.
PCI-X Latency Timer
Sets the value to be programmed into PCI-X Latency Timer Register.
Options available: 32 PCI Bus Clocks/64 PCI Bus Clocks/96 PCI Bus Clocks/128 PCI Bus Clocks/160
PCI Bus Clocks/192 PCI Bus Clocks/224 PCI Bus Clocks/248 PCI Bus Clocks.
Default setting is 64 PCI Bus Clocks.
VGA Palette Snoop
Enable/Disable VGA Palette Registers Snooping.
Options available: Enabled/Disabled. Default setting is Disabled.
PERR#/SERR# Generation
Enable/Disable PCI Device to Generate PERR#/SERR#.
Options available: Enabled/Disabled. Default setting is Disabled.
Above 4G Decoding
Enable/Disable 64-bit capable Devices to be decoded in Above 4G Address Space (Only if System
Supports 64 bit PCI Decoding).
Options available: Enabled/Disabled. Default setting is Enabled.

Table of Contents

Related product manuals