Gigabyte R281-Z91 - Error Management

- 101 - BIOS Setup
5-4-2 Error Management
Error Management
Platform First Error Handling
Enable/Disable PFEH.
Options available: Enabled/Disabled. Default setting is Enabled.
MCA Error Threshold Count
MCA Error Threshold Count. 0 - Disable Error.
Options available: 0/1/5/10/100/1000. Default setting is 10.
DRAM Address/Command Parity With Replay
RCD Parity
Enable/disable Registering Clock Driver (RCD) Parity (RDimmParEn).
Options available: Enabled/Disabled. Default setting is Enabled.
DRAM Address Command Parity Retry
Enable/disable DRAM Address Command Parity Retry.
Options available: Enabled/Disabled. Default setting is Disabled.
DRAM Write Data CRC with Retry
Write CRC Enable
If CRC is enabled, the memory is expecting CRC to be sent with the write data.
Options available: Enabled/Disabled. Default setting is Disabled.