Gigabyte S451-Z30 - Hard Disk Drive Leds

- 21 - System Appearance
2-5 Hard Disk Drive LEDs
3.5" Hard Drive
%OXH
*UHHQ5
HG$OWHUQDWLYH
Blue LED: Power Indicator. Turned on whenever disk drive is properly installed.
Green LED: Activity indicator. Stay off when idle and blinking whenever disk drive is accessing.
Red LED: Fail and Locate indicator. Turned on when disk failure occurs. Blinking when locate HDD, RAID
rebuild and RAID consistent check.
SES
Status
Power-On State (before SES client intervenng)
Informave
Acvity
Status Descripon
Red LED
(Error)
Green LED
(Acvity)
Priority
(Hex)
SES Control
(Hex)
Forced
Condion
Cleared
Empty slot or disk
unplugged
Off Off 10
N/A
(SEP internal)
OK Off 11 RQST OK
Condion
Cleared
Disk loaded or
inserng
Off ActFlash
ActFlash
Device Off
Power down phy
or bay
Off 10
RQST
Device Off
ActFlash
Acve
(Acvity)
Off 10
RQST
Acvity
ActFlash
Consistence
Check
(Cons Chk)
Power down phy
or bay
Off 03
RQST
Cons Chk
ActFlash
Rebuild/
Remap
(disk array)
Spare disk
summoned for
crical
RAID rebuild
Off 03
RQST
Rebuild/Remap
ActFlash
Reserved
Device
Host Spare
Do Not
Remove
Usually for RAID
consistence
Off 0E
RQST RSVD
Device
RQST Host Spare
DO Not Remove
ActFlash
11
N/A
(SEP internal)