EasyManua.ls Logo

Gigabyte SkyVision WS100 - User Manual

Gigabyte SkyVision WS100
46 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SkyVision WS100
User’s Manual
Copyright
© 2012 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. (“GBT”). No part of this manual may be
reproduced or transmitted
in any form without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the properties of their respective owners.
Notice
Please do not remove any labels on this product. Doing so may void the warranty of this
product. Due to rapid change in technology, some of the speci cations might be out of date
before publication of this manual. The author assumes no responsibility for any errors or
omissions that may appear in this document nor does.The author make a commitment to
update the information contained herein.
Rovi Product Notice:
This product incorporates copyright protection technology that is protected by U.S. patents
and other intellectual property rights. Use of this copyright protection technology must be
authorized by Rovi Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is
prohibited.

Table of Contents

Questions and Answers

  • J
    Jonathan StewartAug 11, 2025
    What to do if there is no display output on the Gigabyte SkyVision WS100 Receiver?
    • J
      James CummingsAug 11, 2025
      If you're experiencing no display output on your SkyVision WS100, try the following: * Ensure all cables are connected properly. * Confirm your display is in 'HDMI' input mode. * Check the distance between the SkyVision external display WS100 transmitter and receiver, keeping in mind that the maximum transmit distance is 10 meters and may vary depending on the environment. * Unplug the SkyVision WS100 transmission kit and then re-plug it.
  • T
    tamaradanielAug 21, 2025
    What to do if there is no audio from the Gigabyte SkyVision WS100 Receiver?
    • D
      Dale JohnsonAug 21, 2025
      If you're not getting any audio, first ensure that your TV volume is properly set and not in Mute mode. Also, check if the audio connectors are properly connected.
  • D
    Daniel BryantAug 31, 2025
    What to do if video output does not entirely fit the external display screen on Gigabyte SkyVision WS100 Receiver?
    • S
      sbridgesAug 31, 2025
      If the video output doesn't entirely fit the external display screen, try changing either the source device’s screen resolution or the external display screen’s resolution.

Gigabyte SkyVision WS100 Specifications

General IconGeneral
USB PortUSB 2.0
Input Impedance75 Ohm
Video DecodingMPEG-2
Audio DecodingMPEG1 layer I&II
Video OutputHDMI, CVBS
Audio OutputHDMI, RCA