4-3 Installation of Add-On card
SUMO 4192 / SUMO 4198 / SUMO 5115 supports tool-free installation of interface cards,
e.g. graphic card or sound card, etc.
4-3-1 Unlock the PCI slot retention lock.
4-3-2 Remove the internally attached
dust-proof PCI slot.
4-3-3 Insert the add-on card into the
expansion slot with care.
4-3-4 Lock the PCI slot retention lock to
secure.
4-4 Installation of Front Multi-Media I/O Ports
The front panel consists of (1) 2 x USB 2.0, 1 x IEEE 1394 and 1 x Audio Set (AC’97 / HD)
(2) Power SW / Reset SW / LED connectors
(1) 2 x USB 2.0, 1 x IEEE 1394 and 1 x audio jacks
4-4-1 Insert the USB 2.0 connector into the corresponding sockets on the
motherboard. (Please double check the layout on motherboard user manual)
4-4-2 Insert the IEEE 1394 connector into the corresponding socket on the
motherboard. There is a converter connectors, please refer to the instructions
provided by the motherboard manufacturer and make sure the correct type of
connector prior to installation.
4-3-1 4-3-2
4-3-3 4-3-4
Incorrect connector installation may possibly burn out the motherboard and other
components. Be sure to observe the instructions on installation manual. Any loss caused
by nonobservance of the proper operation provided is not covered by the warranty.
The connector or socket may be different to different motherboards. For detailed
instructions, please refer to the instructions provided by the motherboard manufacturer.
Pin Definition Pin Definition
1 Power 6 USB Dy+
2 Power 7 GND
3 USB Dx- 8 GND
4 USB Dy- 9
5 USB Dx+ 10 USB Over current
USB 2.0 connector
To Next Page
Loading...