Gigabyte TRX40 DESIGNARE - Page 11

- 11 -
Hardware Installation
USB  CPU:
- 4 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
 Chipset:
- 1 x USB Type-C
™
port on the back panel, with USB 3.2 Gen 2 support
- 1 x USB Type-C
™
port with USB 3.2 Gen 2 support, available through the
internal USB header
- 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
- 4 x USB 3.2 Gen 1 ports available through the internal USB headers
 Chipset+2 USB 2.0 Hubs:
- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through
the internal USB headers)
Internal
Connectors
 1 x 24-pin ATX main power connector
 2 x 8-pin ATX 12V power connectors
 1 x OC_PEG power connector
 1 x CPU fan header
 1 x water cooling CPU fan header
 2 x system fan headers
 4 x system fan/water cooling pump headers
 2 x addressable LED strip headers
 2 x RGB LED strip headers
 4 x M.2 Socket 3 connectors
 8 x SATA 6Gb/s connectors
 1 x front panel header
 1 x front panel audio header
 1 x USB Type-C
™
header, with USB 3.2 Gen 2 support
 2 x USB 3.2 Gen 1 headers
 2 x USB 2.0/1.1 headers
 1 x GIGABYTE GC-TITAN RIDGE Add-in Card Connector
 1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S
module only)
 1 x power button
 1 x reset button
 2 x temperature sensor headers
 1 x Clear CMOS jumper
Back Panel
Connectors
 1 x Q-Flash Plus button
 1 x Clear CMOS button
 1 x USB Type-C
™
port, with USB 3.2 Gen 2 support
 5 x USB 3.2 Gen 2 Type-A ports (red)
 2 x USB 2.0/1.1 ports
 2 x RJ-45 ports
 2 x SMA antenna connectors (2T2R)
 1 x optical S/PDIF Out connector
 5 x audio jacks
I/O Controller  iTE
®
I/O Controller Chip