Gigabyte TRX40 DESIGNARE - Onboard LEDs and Buttons

- 23 -
Hardware Installation
1-8 Onboard LEDs and Buttons
Status LEDs
The status LEDs show whether the CPU, graphics card, memory, and operating system are working properly
after system power-on. If the CPU/VGA/DRAM LED is on, that means the corresponding device is not working
normally; if the BOOT LED is on, that means you haven't entered the operating system yet.
VGA: Graphics card status LED
DRAM: Memory status LED
CPU: CPU status LED
BOOT: Operating system status LED
Quick Button
This motherboard has 2 quick buttons: power button and reset button. The power button and reset button allow
users to quickly turn on/off or reset the computer in an open-case environment when they want to change
hardware components or conduct hardware testing.
PW_SW: Power Button
RST_SW: Reset Button
VGA
DRAM
CPU
BOOT
PW_SW
RST_SW