13) LED_C1/LED_C2 (RGB (RGBW) LED Strip Extension Cable Headers)
The headers can be used to connect a standard 5050 RGB (RGBW) LED strip (12V/G/R/B/W), with
maximum power rating of 2A (12V) and maximum length of 2m.
Pin No. Denition
1 12V
2 G
3 R
4 B
5 W
F_USB30
F_U
B_
F_ F_
_
B
BS_
B
SB_
B
_S
S_
_
B
_U
_
B
S
123
123
123
123
1
1
1
1
BSS
S
_S
SSU
1 2 3 4 5
S3
BSSS
U
__ 3
F_USB3F
S _
S _
S _
SF
B_
B_
F
_0
S
S
_0F
_F
_
_
__B
U
S _S
_
USB0_B
B_
F_USB3
_
F_USB30
F_U
B_
F_ F_
_
B
BS_
B
SB_
B
_S
S_
_
B
_U
_
B
S
123
123
123
123
1
1
1
1
BSS
S
_S
SSU
1 2 3 4 5
S3
BSSS
U
__ 3
F_USB3F
S _
S _
S _
SF
B_
B_
F
_0
S
S
_0F
_F
_
_
__B
U
S _S
_
USB0_B
B_
F_USB3
_
1
1
Connect one end of the RGB (RGBW) LED strip extension cable to
the header and the other end to your RGB (RGBW) LED strip. The
black wire (marked with a triangle on the plug) of the extension cable
must be connected to Pin 1 (12V) of this header. The 12V pin (marked
with an arrow) on the other end of the extension cable must be lined
up with the 12V of the LED strip. Be careful with the connection
orientation of the LED strip; incorrect connection may lead to the
damage of the LED strip. If you are connecting a RGBW LED strip
(5-pin),combinethetwoplugsoftheextensioncabletogetherrst.
If you are connecting a RGB LED strip (4-pin), use only the 4-pin
plug of the extension cable.
12V
1
RGBW
LED
Strip
RGB
LED
Strip
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
For how to turn on/off the lights of the LED strip, refer to the instructions on in Chapter 2, "BIOS
Setup," "Peripherals," or Chapter 5, "Unique Features," "APP Center\RGB Fusion."
LED_C1
LED_C2
To Next Page
Loading...
