Gigabyte X299 AORUS Ultra Gaming - Page 54

BIOS Setup
- 54 -
& DDR VPP CH(A/B) PWM Switch Rate
Allows you to set the PWM frequency for Channel A and Channel B memory VPP voltage. The adjustable
range is from 300.0KHz to 500.0KHz. (Default: Auto)
& DDR CH(C/D) PWM Switch Rate
(Note)
Allows you to set the PWM frequency for Channel C and Channel D memory VPP voltage. The adjustable
range is from 300.0KHz to 500.0KHz. (Default: Auto)
& PWM Phase Control
Allows you to automatically change the PWM phase according to the CPU load. The power-saving
levels are (from lowest to highest): eXm Perf (Extreme Performance ), High Perf (High Performance),
Perf (Performance), Balanced, Mid PWR (Mid Power), and Lite PWR (Light Power). Auto lets the BIOS
automaticallycongurethissetting.(Default:Auto)
& S3 Save Mode
Determines whether to allow memory voltage drop to a power-saving level when the system is in S3 state.
(Default: Disabled)
` CPU Core Voltage Control
This section provides CPU voltage control options.
` Chipset Voltage Control
This section provides Chipset voltage control options.
` DRAM Voltage Control
This section provides memory voltage control options.
` Internal VR Control
(Note)
This section provides VR voltage control options.
(Note) This item is present only when you install a CPU that supports this feature.