`
&
The settings above are synchronous to those under the same items on the
menu.
&
(Note)
AVX offset is the negative offset of AVX ratio.
& Uncore Ratio
Allows you to set the CPU Uncore ratio. The adjustable range is dependent on the CPU being used.
& Uncore Frequency
Displays the current CPU Uncore frequency.
&
CPU Flex
value if CPU Clock Ratio is set to Auto. (Default: Disabled)
&
&
(Note)
Allows you to determine whether to enable the Intel
®
CPU Turbo Boost technology. Auto lets the BIOS
& Turbo Ratio
(Note)
Allows you to set the CPU Turbo ratios for different number of active cores. Auto sets the CPU Turbo ratios
&
order to reduce the power. Auto
& Core Current Limit (Amps)
limit, the CPU will automatically reduce the core frequency in order to reduce the current. Auto sets the
& Turbo Per Core Limit Control
(Note)
Allows you to control each CPU core limit separately. (Default: Auto)
&
(Note)
Allows you to select the number of CPU cores to enable in an Intel
®
multi-core CPU (the number of CPU
cores may vary by CPU). Auto
&
(Note)
Allows you to determine whether to enable multi-threading technology when using an Intel
®
CPU that
supports this function. This feature only works for operating systems that support multi-processor mode.
Auto
&
®
(Note)
Enables or disables Intel
®
Speed Shift Technology. Enabling this feature allows the processor to ramp up
its operating frequency more quickly and then improves the system responsiveness. (Default: Disabled)
&
(Note)
Enables or disables Intel
®
CPU Enhanced Halt (C1E) function, a CPU power-saving function in system halt
state.
When enabled, the CPU core frequency and voltage will be reduced during system halt state to
decrease power consumption. Auto
(Note) This item is present only when you install a CPU that supports this feature. For more information about
Intel
®
CPUs' unique features, please visit Intel's website.
- 22 -
To Next Page
Loading...
