•
• After installing the operating system, insert the motherboard driver disk into your optical drive. Click
Run
install. You can click the Xpress Install
the arrow
icon to individually install the drivers you need.
3-3 Drivers Installation
Please visit GIGABYTE's website for
more software information.
Please visit GIGABYTE's website
software.
please follow the steps below:
1. After system restarts, go to the BIOS Setup, make sure CSM Support under the menu is disabled.
2. Go to and make sure is disabled. To
enable the Optane
™
memory, set to RST Controlled.
3. Enter the operating system, launch the Intel
®
enable Intel
®
Optane
™
Memory on the Intel
®
™
Memory screen.
4. Follow the on-screen instruction to continue the installation and then restart the system when completed.
• An Optane
™
memory cannot be used to accelerate an M.2 PCIe SSD.
• Do not abruptly remove the Optane
™
memory. Doing so will cause the operating system to stop functioning correctly.
• If you want to change/remove the Optane
™
memory, you must disable it using the Intel
®
™
• After enabling the Optane
™
memory, the related BIOS settings will remain even after a BIOS update.
- 41 -
To Next Page
Loading...
