Gigabyte Z490 VISION D - Internal Connectors

- 24 -
Hardware Installation
1-8 Internal Connectors
Readthefollowingguidelinesbeforeconnectingexternaldevices:
• First make sure your devices are compliant with the connectors you wish to connect.
• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
• After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.
1) ATX_12V_2X2/ATX_12V_2X4
2) ATX
3) PEG
4) CPU_FAN
5) SYS_FAN1/2/3/4
6) SYS_FAN5_PUMP/SYS_FAN6_PUMP
7) CPU_OPT
8) EC_TEMP1/EC_TEMP2
9) D_LED1/D_LED2
10) LED_C1/LED_C2
11) SATA3 0/1/2/3/4/5
12) M2A_CPU/M2M_SB/M2P_SB
13) F_PANEL
14) F_AUDIO
15) F_U32C
16) F_U32
17) F_USB1/F_USB2
18) SPI_TPM
19) QFLASH_PLUS
20) CLR_CMOS
21) BAT
22) CPU/DRAM/VGA/BOOT
13619
16
11
2
8
5
17 514 18
1 1
109
3
22
12
21
12
5
7 4 910
15
6
20
8
12