Gigabyte Z590 VISION D - Page 50

BIOS Setup
- 50 -
d Turbo Power Limits
Allows you to set a power limit for CPU Turbo mode. When the CPU power consumption exceeds the
speciedpowerlimit,theCPUwillautomaticallyreducethecorefrequencyinordertoreducethepower.
AutosetsthepowerlimitaccordingtotheCPUspecications.(Default:Auto)
& Power Limit TDP (Watts) / Power Limit Time
 AllowsyoutosetthepowerlimitformemoryTurbomodeandhowlongittakestooperateatthespecied
power limit. AutosetsthepowerlimitaccordingtotheCPUspecications.Thisitemiscongurableonly
when Turbo Power Limits is set to Enabled. (Default: Auto)
& Core Current Limit (Amps)
 AllowsyoutosetacurrentlimitforCPUTurbomode.WhentheCPUcurrentexceedsthespeciedcurrent
limit, the CPU will automatically reduce the core frequency in order to reduce the current. Auto sets the
powerlimitaccordingtotheCPUspecications.ThisitemiscongurableonlywhenTurbo Power Limits
is set to Enabled. (Default: Auto)
d Turbo Per Core Limit Control
(Note)
Allows you to control each CPU core limit separately. (Default: Auto)
& ExtremeMemoryProle(X.M.P.)
(Note)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disabled Disables this function. (Default)
Prole1  UsesProle1settings.
Prole2
(Note)
 UsesProle2settings.
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& Memory Ref Clock
Allows you to manually adjust the memory reference clock. (Default: Auto)
& Memory Odd Ratio (100/133 or 200/266)
(Note)
Enabled allows Qclk to run in odd frequency. (Default: Auto)
& Gear Mode
(Note)
Allows you to improve the maximum OC frequency potential. (Default: Auto)
(Note) This item is present only when you install a CPU and a memory module that support this feature.