10. Once you’ve installed the remote pods and they have connected back to the main pod,
connect to the new Wi-Fi network from your phone or computer and confirm you can access
the internet by visiting www.gigacomm.net.au
Now that your internet is setup, we can look at connecting your phone system. Refer to the IP
Telephony Installation Guide for more details. Also consider that any devices that were on the old
Wi-Fi network now need to be connected to the new Wi-Fi network.
If you are having problems setting up your phone contact Gigacomm Support on 1300 004 442 or
email us at support@gigacomm.net.au
NetComm CPE & Access Point Setup Guide
To Next Page
Loading...