14
Gigaset AS405 / Großbritannien / A31008-M2501-L101-1-7619 / Penguini.fm / 04.08.2014
Template Bali, Version 1, 16.02.2012
Time Control (day/night mode)
You can specify a time period when you do not want the telephone to signal external calls e.g., during the night.
Activating Time Control:
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Time Control ¤ §OK§ ¤ Activation ¤ §OK§ (‰ = activated)
Setting time period:
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Time Control ¤ §OK§ ¤ q Settings ¤ §OK§
¤ Off from:
~
(Enter time in 4-digit format) ¤ §OK§ ¤ Off until:
~
(Enter time in 4-digit format) ¤ §OK§
Anonymous calls silent
You can set your handset so that it doesn't ring for calls where Calling Line Identification has been withheld. The call will
only be signalled on the display.
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q An.Call Silent ¤ §OK§ (‰ = activated)
Activating/deactivating the ringer
Deactivating/reactivating the ringer permanently
In idle status, press and hold the star key P. If the ringer is deactivated, the
Ú
icon appears in the display.
Deactivating the ringer for the current call
§Menu§ ¤ Silent ¤ §OK§
Setting ring tones of the base station
Set the Ringer Volume, Ringer Melody and the Time Control for the base station:
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Base ¤ §OK§ ¤ Audio Settings ¤ §OK§
¤ q Ringer Volume/Ringer Melody/Time Control
Perform the setting analogously to the description in "Setting ring tones of the handset".
Activating/deactivating music on hold
You can set that your external participant hears music in case of internal recall and during call transfer.
§Menu§ ¤
P#Q5#1M
¤ The number for the current setting flashes: 0 = off; 1 = on ¤ enter number
¤ §OK§.
Repeater mode
With a repeater, you can increase the range of your base station. You will need to activate repeater mode (¢ page 22).
Repeater mode and No Radiation mode (¢ page 22) cancel each other out.
Resetting the handset
You can reset individual settings and changes that you have made. Entries in the directory, the calls list and the handset's
registration to the base station will be retained.
§Menu§ ¤ q Settings ¤ §§OK§§ ¤ q Handset ¤ §§OK§§ ¤ q Reset Handset ¤ §§OK§§ ¤ Reset? ¤ §§OK§§
Restoring the base station
When restoring factory settings:
◆ Individual settings are reset.
◆ All lists are deleted.
◆ The No Radiation mode is deactivated.
The date and time are retained. The answering machine is ready for use approx. 15 seconds after the base station has
been reset.
Resetting the base station via the menu
When resetting via the menu
◆ Handsets are still registered.
◆ The system PIN is not reset.
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Base ¤ §OK§ ¤ q Base Reset ¤ §OK§ ¤ Reset? ¤ §OK§
Resetting the base station using the key on the base station
When resetting the base station using the key on the base station
◆ All handsets are de-registered and
◆ The system PIN is reset to the original code 0000.
Carry out the following steps: Remove the mains cable from the base station. Hold down the registration/paging key
on the base station
(¢ page 1) and reconnect the power cable to the base station at the same time. Hold the key down
for at least 5 seconds.
To Next Page
Loading...
