8
Gigaset AS405 / Großbritannien / A31008-M2501-L101-1-7619 / Penguini.fm / 04.08.2014
Template Bali, Version 1, 16.02.2012
Using shortcut keys
You can assign directory entries to the keys 2–9:
s ¤ q (select entry) ¤ §Menu§ ¤ q Shortcut ¤ §OK§
¤ q (select key) ¤ §OK§ or ~ (press the key you want to assign the entry to)
To dial, press and hold the required shortcut key.
Sending the directory to another handset
Prerequisites:
◆ The sending and receiving handsets must both be registered to the same base station.
◆ The other handset and the base station can send and receive directory entries.
s ¤ q (select entry) ¤ §Menu§ ¤ q Send Entry / Send List ¤ §OK§
¤ q (Select the internal party) ¤ §OK§ or ¤ ~ (enter the internal number of the receiving handset)
Last number redial list
This list contains the ten last dialled numbers.
Dialling from the last number redial list
c (press briefly) ¤ q (select entry) ¤ c
Managing entries in the last number redial list
c (press briefly) ¤ q (select entry) ¤ §Menu§
You can select the following settings:
Calls list/answering machine list/network mailbox list
Press the display key ’ , to open the list overview. If you have new messages, only lists with new messages are dis-
played. Scroll through the lists by pressing q.
An advisory tone sounds as soon as a new entry appears in the calls list/answering machine list/network mailbox list.
By default the left display key flashes and the message New messages appears on the display. You can change this
behaviour by using the following procedures:
¤ Press the key sequence: §Menu§ ¤ P#Q5#M
The following is displayed:
¤ Press one of the following keys to select the message type:
5 for missed calls
or M for messages on the answering machine/network mailbox
Your selection is displayed (e.g., 5 for missed calls); the current setting flashes:
Press key Q or 1, to set the behaviour for new messages:
Q The presence of new messages is displayed (default setting).
or 1 The presence of new messages is not displayed.
Your selection is displayed (e.g., 1):
¤ Press the display key §OK§.
Settings will only be changed once a new message has been received.
Use Number Edit the number or open the directory by pressing the control key s to insert a number from the
directory at the current position. Then dial or use other functions with
§Menu§.
Copy to Dir. Copy an entry to the directory.
Delete Entry Delete selected entry.
Delete List Delete all entries.
Please note
When calls are saved in the network mailbox, you will receive a message if the appropriate settings have been made
(depending on your network provider).
To Next Page
Loading...
