Template Module, Elderly, Version 1.0, 20.02.2019,
Phone settings
Gigaset E295 / LUG BE-PTT en / A31008-M2901-E151-1-3F19 / settings.fm / 2/13/20
46
Resetting the base
The system PIN is reset to the original code 0000.
The time and date are not affected.
Resetting the base from the menu
The handsets remain registered. The system PIN is not reset.
¤ Settings OK Base OK Reset Base OK . . .
Reset? OK
Resetting the base using a key on the base
All handsets are de-registered. The system PIN is set back to the original code
0000.
¤ Remove the power cable from the base Keep pressed the Registration/
paging key on the base At the same time, reconnect the power cable to
the base Keep the key pressed for at least another 5 seconds
A reset disables mode No Radiation, resets individual settings and deletes all
lists.
To Next Page
Loading...
