4
3 Set Your Photo Frame Options
To define frame settings, complete the following steps:
1. Press MENU to enter the main menu.
2. Press PREV, NEXT, UP, or DOWN to navigate to
SETUP and press PLAY/PAUSE/MODE. The setup
menu appears.
3. Use the
PREV, NEXT, UP, or DOWN buttons to
navigate to a setting.
4. Use PLAY/PAUSE/MODE and NEXT to select
options. Navigate through the following options using
the PREV, NEXT, UP, or DOWN buttons:
Brightness: –3 to +3
Slide Show Time: 5, 10, or 30 seconds display
time for each photo.
OSD Language: English, French, or Spanish.
Default: Restores all options to factory settings.
Exit Setup Menu: Return to the main menu.
5. Press PLAY/PAUSE/MODE to confirm your settings.
To Next Page
Loading...
