Do you have a question about the Gigaware 25-421 and is the answer not in the manual?
Remove enclosure screws and slide out the hard drive holder for access.
Connect the hard drive's power jack and data port to the enclosure's internal connectors.
Fasten the hard drive in place using the supplied short screws.
Slide the hard drive holder back into the enclosure and secure it with screws.
Connect the USB cable between the enclosure and computer, and the AC adapter to power.
Press the ON/OFF switch to turn the hard drive enclosure on.
The blue light indicates power on; flashing indicates data transfer.
Insert the hard drive enclosure vertically into the provided stand.
Loading...