7
FC 203B FRACTION COLLECTOR | QUICK REFERENCE GUIDE
Key COntrOls
While the fraction collector is draining, pressing ADV
does not resume collection, but rather it advances the
number of the current tube, which is always displayed
during a run. When DRAIN is pressed a second time, the
fraction collector collects into the vessel shown on the
display. This allows for maximum flexibility: after draining,
optionally resume collection in the last vessel, the next
one, or the first vessel in the next row.
0–9
Press number keys to enter numerical values. The decimal
point, where applicable, does not have to be entered.
One easy way to enter a new number is to press the NO
key to clear the current number and then enter the new
number. Numbers appear on the display at the far right,
and move to the left with each successive entry.
YES
Press YES when you want the instructions shown on the
top line of the display to apply. The YES Key has the same
function as the Ok Soft Key.
NO
Press NO to clear the numerical value from the
display. Also used to choose alternate options (e.g.,
programmable output 2).
To Next Page
Loading...