EasyManua.ls Logo

Gima 24402 - Appliance Description, Installation, and Operation; Automatic Switch Off Function; Appliance Description and Accessories; Battery Installation Guide

Gima 24402
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
ENGLISH
Automatic switch off function
After 3 minutes not in use, the unit will switch off automatically for extending the battery life.
When detecting low battery voltage, the unit will turn off au-
tomati- cally after 7 short beeps and LED ash indication.
Impeccable design for containing the accessories inside the
main appliance, portable and suitable for travel.
DESCRIPTION OF THE APPLIANCE
AND SUPPLIED ACCESSORIES
1. On/Off switch (press button)
2. Protective cover
3. Electric comb
4. Lid of the battery compartment
5.Cleaning brush
6. Battery compartment
INSTALLATION OF THE BATTERIES
Open the lid protecting the battery by lifting the point “4“, the
lid connects the housing to avoid missing.
Insert two AAA batteries, observe the proper polarity (+/-) of
the batteries as indicated on the batteries and on the battery
compartment. A polarity error can damage your appliance and
compromise the guarantee.
OPERATION
1. Press On/Off switch button “1” for two seconds to operate the appliance. LED light will power
on, buzzer will beep three seconds long to indicate the operation.
2. Use the appliance as normal comb. Please use the unit on dry hair. Undo the knots or braids
before using the unit.
3. While operating the unit, LED lights will be on and also the buzzer will sound every three sec-
onds.
4. The buzzer will have a short and quick humming sound, LED indicator ashes quickly when
the teeth come in contact a louse or egg.
4-1. The voltage will kill lice and eggs.
4-2. Be sure to clean the comb with the cleaning brush thoroughly after every usage.
5. After use, remember to switch off the unit and clean the comb with cleaning brush thoroughly,
put the protective cap “2” back on the unit during storage.

Related product manuals