Gima OGM-211 - User Manual

• H

  Heather WallsAug 7, 2025

  Why my Gima OGM-211 fails to turn on?

  

  Same questionReply

  • C

    chelseacarterAug 7, 2025

    If your Gima Blood Glucose Meter fails to turn on, first replace the battery. If the meter has been in a cold environment, allow it to reach room temperature for 30 minutes before retrying. If the issue continues, remove the batteries for 30 seconds before reinserting them. Other potential causes include a Power On self-check error, an internal calibration check error, removing the test strip during the test, applying the sample too soon, using a contaminated or used test strip, or an insufficient sample. In the latter cases, repeat the test ensuring the test strip remains in place, applying the sample after the blood drop/test strip symbol appears, using a new test strip, and applying enough sample to fill the test strip check window within 3 seconds.

    

    Reply
• S

  Sheila KellerAug 11, 2025

  What to do if temperature has exceeded the operating temperature of Gima Blood Glucose Meter?

  

  Same questionReply

  • M

    Mr. Jacob BennettAug 11, 2025

    If the Gima Blood Glucose Meter displays a message indicating that the temperature has exceeded the operating temperature, move to a cooler environment and repeat the test.

    

    Reply
• J

  James WilsonAug 16, 2025

  What to do if temperature is below the operating temperature of Gima Blood Glucose Meter?

  

  Same questionReply

  • D

    Debra CarrollAug 16, 2025

    If the Gima Blood Glucose Meter indicates that the temperature is below the operating temperature, move to a warmer environment and repeat the test.

    

    Reply
• C

  Christina PorterAug 20, 2025

  What to do if Gima OGM-211 data port is plugged in with data transfer cable?

  

  Same questionReply

  • R

    Ryan Smith MDAug 20, 2025

    If your Gima Blood Glucose Meter's data port is plugged in with a data transfer cable while the meter is waiting for a sample with the strip already inserted, unplug the data transfer cable from the meter’s data port. Then, remove and reinsert the strip into the strip port before testing again.

    

    Reply
• J

  Jamie LoganAug 25, 2025

  How to fix strip testing error on Gima Blood Glucose Meter?

  

  Same questionReply

  • C

    Clifford RodriguezAug 25, 2025

    If your Gima Blood Glucose Meter shows a strip testing error, repeat the test, ensuring you apply enough sample to fill the test strip check window within 3 seconds. Avoid touching the strip during the meter countdown. Use a fresh blood sample with the correct hematocrit level, ensuring the blood sample is not contaminated.

    

    Reply
• J

  Justin RobersonAug 29, 2025

  Will discharged battery affect Gima OGM-211 results?

  

  Same questionReply

  • A

    Abigail SharpAug 29, 2025

    Even if the battery is discharged, the test results from your Gima Blood Glucose Meter will still be accurate, but you should replace the two batteries as soon as possible.

    

    Reply
• M

  Mrs. Patty DavisSep 2, 2025

  What to do if Gima OGM-211 doesn't allow tests because of discharged battery?

  

  Same questionReply

  • L

    Lauren DaviesSep 2, 2025

    Replace the two batteries in your Gima Blood Glucose Meter and repeat the test.

    

    Reply

Gima OGM-211 Specifications

General

Brand	Gima
Model	OGM-211
Category	Blood Glucose Meter
Language	English