7.2 Connect both the sockets together
(if you would be riding in heavy rainfall
it is better to seal it with a tape to avoid
water seeping into the wires)
7.3 Once you have tightened the bolts and
nuts and also attached the two sockets
together, the final installed version should
like the adjacent image
Step 8 : Installing the battery
8.1 Lay down the bike on it’s right
side so that it rests against the
right pedal and the right side of the
handlebar. GIN X houses the
removable battery in the
downtube for extra safety
measures
9
To Next Page
Loading...