8.2 Battery can be charged on its own
by removing it from the downtube or
along with the bike. While sliding the
battery into the downtube frame,
ensure that the charging port in the
battery and the charging point in the
downtube are in the same line as
shown in the adjacent image
8.3 The final installed battery should
look like the adjacent image. Ensure
that once you have locked the battery
with the key, you removed the key and
keep it at a safe location. You will only
need the key while locking the battery
into the frame (you do not need it while
riding the GIN X electric bike)
Why is a FUSE present in my battery?
The purpose of the FUSE is to prevent excess current to pass through the
battery. It prevents the battery to malfunction while charging with larger
amount of current than allowed
IMPORTANT
NEVER CHARGE THE BATTERY OVERNIGHT OR FOR LONGER
THAN 6 HOURS AT A STRETCH
10
To Next Page
Loading...