Head light ON : Press for 2 seconds
^
Head light OFF : Press for 2 seconds
^
Walk mode (your bike starts moving by itself) : Keep pressed
Walk mode explained : Your GIN X has walk mode. This means that if
you are walking uphill or on a road and want to carry your GIN X
along with you, all you have to do is activate the walk mode! You
won’t have to carry it. It is also very handy when the tyres are flat and
you need to take it to a nearby repair shop etc.
During the walk mode, it activates the motor by itself and starts to
walk along with you!
^
13
Understanding programmes modes
On the next page all programme modes are highlighted. You can set these
settings for optimum performance. But remember not to change the
data/numbers mentioned with '- Do not change this -' in the table below.
Changing them will make your warranty null and void.
To Next Page
Loading...