Gin X - Page 19

P10
PAS/Throttle
mode
2
0: PAS Active, Throttle Inactive
1: PAS Inactive, Throttle Active
2: Both PAS and Throttle Active
P11
PAS
sensitivity
1
Sensitivity of PAS sensor. When set to
higher numbers, it will take more crank
rotations
for the motor to turn on
P12
PAS
strength
5
Strength of PAS mode. When set to higher
numbers, the motor will come on stronger.
On
lower numbers, it will be more gentle
P13
Magnets
type
12
- DO NOT CHANGE THIS -
P14
Controller
current
12
- DO NOT CHANGE THIS -
P15
NA
39
- DO NOT CHANGE THIS -
P16
Odometer
Reset
NA
Hold the up arrow for 5 second to reset the
Odometer
P17
NA
0
- DO NOT CHANGE THIS -
NOTE
DO NOT CHANGE THE VALUES MARKED IN YELLOW ABOVE
VERY IMPORTANT- DOING SO WILL MAKE YOUR BIKE’S WARRANTY
NULL & VOID
15