To complete the backrest the seat cushion and cushion back panel
have to be installed. First attach the back panel by aligning the holes
on the panel with those on the support and screwing (i) into place. Next
align the cushion into place and screw (i) into place through the back
panel.
Rear Top
The first piece of the attached canopy is the rear top section which is
attached to the top of the backrest support. To start, insert the larger
threaded clips (t) into the slots on the rear top piece. Align the now
threaded holes with those on backrest support and bolt into place. (d)
14
To Next Page
Loading...
