Step 6 - Drip Guards
The 2 clear plastic drip guards install just above the seam where the top of
the door meets the body. They are there to prevent water from collecting in
the seam, during use in wet conditions, and dripping on the occupants when
the door is opened. Ensure the surface where the guard is clean. Use a
damp cloth and mild soap if necessary. Carefully remove the backing on the
adhesive strip and apply to the vehicle in the correct position above the door
seem, yet not impeding the doors opening motion.
Step 7 - Charge
Your Golf ships with minimal charge and must be fully charged before your
first use. Please see pg. 17 for charging instructions.
10
To Next Page
Loading...