Step 4 - Battery Installation
Begin battery installation by opening the flap on the rear body that conceals
the charging port and breaker. Ensure the breaker is in the off position
before beginning installation. Locate the battery wires, and terminal
hardware.
Arrange the 5 batteries in the metal battery tray to allow for easy
connections below. Batteries will be connected in series, (Battery 1
connects to battery 2, 2 to 3, 3 to 4, 4 to 5) in the manner described next.
The connection process of an individual battery wire to each battery wire is
quite simple, repeat this basic process with each connection in the manner
and order described ahead.
07
To Next Page
Loading...