Name: Gioteck VX1PS3-21
Brand: Gioteck
Rating: 5 (1 reviews)

To Next Page

To Previous Page

1. Plug the cable from your VX-1 Wired

Controller into a USB Port on PC.

The driver will be installed automatically.

2. Channel 1 LED on the controller will

illuminate. The controller is now ready

to use in “Digital mode”.

3. Press the Home Button to switch from

Default “Digital Mode” to “Analogue Mode”.

4. To check/change the default key mapping and functions, go to:

Control Panel > Devices and Printers > Settings >

Gioteck PS3 Wired Controller > Properties.

Digital mode

Analogue mode

VX-1 PC SET UP

Questions and Answers:

Need help?

Do you have a question about the Gioteck VX1PS3-21 and is the answer not in the manual?

Gioteck VX1PS3-21 Specifications

General