Gira G1 - User Manual

Gira G1
230 V 2067 05 / 2067 12
PoE 2069 05 / 2069 12
24 V 2077 05 / 2077 12
[EN] Assembly and
operating instructions
for the installer
Important:
Please read carefully
before use.
Please retain for
future reference.

Summary

Configuring the Gira G1

Commissioning assistant - selecting the operating mode

Guides through initial setup and operating mode selection for the Gira G1.

Configuring the Gira X1 Client

Gira X1 Client settings

Configuring the Alarm Connect security system

Alarm Connect security system settings

System menu

Configuring the Gira HomeServer Client;eNet Client

Initial commissioning

Steps for the initial setup of Gira HomeServer/eNet client on the Gira G1.

Settings

Configuring the Gira HomeServer app

Initial commissioning of the HomeServer app

Guides through creating and configuring profiles for connecting to the Gira HomeServer.

Configuring the eNet Client

Initial commissioning of the eNet SMART HOME app

Guides the initial setup and connection process for the eNet SMART HOME app.

Configuring door communication

Connecting the Gira G1 to the door communication system

Describes how to connect the Gira G1 to a door communication system via a DCS-IP gateway.

Connecting to the DCS-IP gateway

Operating door communication

Operating calls

Weather forecast

Configuring the weather forecast

Explains how to set up and add weather stations for the forecast feature.

Firmware update

Adding firmware

Details the process of adding new firmware versions to the Gira Project Assistant.

Installing firmware

Outlines the steps to load and install new firmware onto the Gira G1 device.

Gira G1 Specifications

General

Resolution	480 x 800 pixels
Power Supply	24 V DC
Protection class	IP20
Display	TFT colour display
Connectivity	Ethernet 10/100
Mounting	Flush mounting