Need help?Do you have a question about the Gira KNX Series and is the answer not in the manual?
Details of the product's classification and identification within the catalogue.
Describes how the KNX choke decouples the bus line and acts as a line terminator.
Advises that installation must be done by skilled persons and outlines hazards of electric shock.
Identifies and describes the key components of the KNX choke, including the reset switch and LED.
Details methods for fitting the device with or without a data rail, including wiring instructions.
Explains that the device is ready for operation after fitting and requires no ETS commissioning.
An alphabetical listing of keywords and their corresponding page numbers for quick reference.
Details of the product's classification and identification within the catalogue.
Describes how the KNX choke decouples the bus line and acts as a line terminator.
Advises that installation must be done by skilled persons and outlines hazards of electric shock.
Identifies and describes the key components of the KNX choke, including the reset switch and LED.
Details methods for fitting the device with or without a data rail, including wiring instructions.
Explains that the device is ready for operation after fitting and requires no ETS commissioning.
An alphabetical listing of keywords and their corresponding page numbers for quick reference.
General| Protocol | KNX |
|---|---|
| Operating Temperature | -5 °C to +45 °C |
| Protection Class | IP20 |
| Communication | Twisted Pair (TP) |
| Dimensions | Varies depending on the specific device within the series. Refer to individual product datasheets. |
| Weight | Varies depending on the specific device within the series. Refer to individual product datasheets. |
To Next Page
