Gira KNX - User Manual

1-gang water-protected surface-mounted KNX push-button bus coupler with single-point
operation
Order No. : 5151 30
1-gang water-protected surface-mounted KNX push-button bus coupler with two-point
operation
Order No. : 5152 30
2-gang water-protected surface-mounted KNX push-button bus coupler with single-point
operation
Order No. : 5161 30
2-gang water-protected surface-mounted KNX push-button bus coupler with two-point
operation
Order No. : 5162 30
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1
(1) Push-button BA
(2) Rocker switch
(3) Rocker
(4) Programming button and LED
3 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database. Planning, installation and commissioning of the device are
1/3
32583502 22.09.2014
Push-button bus coupler
10860486
KNX

Summary

Operating Instructions

Safety Instructions

Electrical equipment must be installed by skilled persons. Follow manual fully.

Device Components

Illustrates and lists the physical parts of the device, including push-buttons, rockers, and programming LED.

Function

Details the device as part of the KNX system and its software-dependent functionality.

Information for Electrically Skilled Persons

Fitting and Electrical Connection

Instructions for connecting the bus line, installing the device, and loading the physical address before mounting.

Commissioning

Steps for switching on bus voltage, programming the device, assigning a physical address, and loading application software.

Appendix

Technical Data

Provides key technical specifications such as KNX medium, voltage, power consumption, and protection class.

Warranty

Details warranty provision and instructions for submitting faulty devices to the service center.

Gira KNX Specifications

General

Category	Adapter
Manufacturer	Gira
Operating Temperature	-5 °C to +45 °C
Storage Temperature	-25 °C to +70 °C
Housing Material	Plastic
Protection Class	IP20
Communication Protocol	KNX
Weight	0.1 kg
Operating Voltage	21-30 V DC