EasyManua.ls Logo

Giraffe P106-G40 - Page 8

Giraffe P106-G40
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 9
MUST
only use detergents which will NOT corrode the coating materials of the high
pressure hose/electrical cable.
EXPLOSION AND ELECTRIC SHOCK HAZARD
MUST
ensure that all people or animals keep a minimum distance of 16yd. (15M) away.
INJURY HAZARD
The unit
MUST
BE fixed when it’s working.
When stopping the appliance,
MUST
shut the appliance’s switch before pulling plug
out.
MUST
use only original or manufacturer approved spare parts for safety sake.
Total Stop (motor stops when trigger released) does NOT always keep effective and
the appliance can NOT be at Total Stop for long time. If ineffective ( for inner seal
damaged, local voltage too low etc),
MUST
turn off the switch to stop the machine
during working.
MUST
use only extension electrical cable with waterproof plug and socket.
Connecting or replace plug and electrical cable
MUST
be carried out by qualified staff.
Electrical cable
MUST
be far away from fire and sharp object;
MUST
cut the power supply immediately in case of breakdown or stop and find out
the reason before re-start the appliance;
MUST
to be sure the appliance standing on dry surface.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Do not tamper with or adjust the safety valve setting.
Safety valve and/or pressure limiting valve.
The safety valve is also a pressure limiting valve.
When the gun trigger is released, the valve opens and the water recirculates
through the pump inlet or is discharged onto the ground.
Caution – Danger!
1.