The 98GC1029 5-Channel Remote Handset is an RF transmitter designed to control up to five awnings and their associated LED lighting strips, primarily for RV applications. It operates on a frequency of 433.92 MHz, facilitating wireless communication with Girard Systems' G-Link motor and control modules. This wireless functionality eliminates the need for extensive wiring and drilling in the vehicle, simplifying installation.
Function Description:
The remote handset serves as a multi-functional control device for Girard Systems RV awnings. It features a circular control pad with distinct buttons for "IN" (retract awning), "OUT" (extend awning), and "STOP" (stop awning movement). Additionally, it includes a button for "LED Lights ON/OFF" to manage the lighting strips integrated with the awnings. The handset is a 5-channel device, meaning it can control up to five individual awnings or groups of awnings independently. Channel selection is indicated by a series of LEDs, allowing the user to easily switch between different awnings or channels.
Important Technical Specifications:
- Model Number: 98GC1029
- Type: 5-channel RF transmitter
- Power Source: Single 3V Lithium battery (CR2430)
- RF Frequency: 433.92 MHz
- Compatibility: Designed for use with Girard Systems' G-Link motor and control modules, including:
- GC136 AC Motor Controller
- GC274A / GC274B AC Motor Controllers
- 98GC74 AC Motor Controller
- GC732G DC Motor Controller
- GC1146C DC Motor Controller
Usage Features:
- Channel Selection: Users can select one of five channels to control specific awnings or groups of awnings. The active channel is indicated by Channel Indicator LEDs.
- Awning Control: The "IN" button retracts the selected awning, while the "OUT" button extends it. The "STOP" button immediately halts any awning movement.
- LED Light Control: A dedicated button allows for turning the LED lighting strips ON or OFF.
- Programming/Pairing: The handset needs to be electronically matched, programmed, or paired with the specific motor controller it will operate. This process typically involves pressing a "Program Button" on the motor controller, followed by a sequence of button presses on the remote handset (e.g., STOP, IN, OUT).
- GC136 AC Motor Controller: Requires pressing the Program button, then STOP on the controller, followed by selecting a channel and pressing IN on the handset.
- GC274A / GC274B AC Motor Controllers: Involves removing the lid of the module, pressing the Program button, then STOP on the controller, followed by selecting a channel and pressing IN on the handset.
- 98GC74 AC Motor Controller: Requires supplying power to the module, selecting a channel, pressing the P2 button on the handset TWICE, and then pressing IN (or OUT if the awning extends instead of retracting). This module has a short 6-second programming window.
- GC732G DC Motor Controller: Similar to the GC136, it involves pressing the Program button, then STOP on the controller, followed by selecting a channel and pressing IN on the handset.
- GC1146C DC Motor Controller: Requires extending the awning partially, locating the P2 button on the back of the handset, pressing it TWICE, and then pressing IN (or OUT if the awning extends instead of retracting).
- P2 Button: Located on the back of the handset, this button is used for pairing the device with certain G-Link Modules.
- Safety Precautions:
- Awnings should be closed during periods of heavy rain or high wind.
- Never leave awnings open and unattended.
- All awnings must be closed before moving the vehicle.
- Ensure the deployment area is free of obstructions (trees, walls, pillars, posts, other vehicles).
- Verify all electrical circuits are operating correctly before use.
- Programming steps must be executed within 10 seconds of the previous one for most modules to prevent reverting to factory settings. It is highly recommended to read and understand the full programming sequence before attempting.
Maintenance Features:
- Battery Replacement: The handset is powered by a single CR2430 3V Lithium battery, located in a compartment on the back of the device. Users can replace this battery as needed.
- Troubleshooting/Support: For queries or assistance with programming, users are advised to contact Girard Systems TOLL FREE at 800-382-8442 during business hours (7:30 am to 3:30 pm P.S.T.).
- Damage caused by wind and rain is not covered by warranty.
- Damage caused by failure to comply with instructions (e.g., moving the vehicle with awnings open) is not covered by warranty.
- Damage caused by collisions with obstructions is not covered by warranty.
Need help?
General
To Next Page