EasyManuals Logo

Girard Systems GC274B User Manual

Girard Systems GC274B
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Page 4 of 11
PRODUCT DESCRIPTION
AC Motor Controller with LED (12V DC) control plus Ignition retract and lockout.
Fig.1
This module is designed to control a single Standard 110v AC Motor up to 8 Amps and
can be remotely operated with any paired G-Link handset or wall switch.
The controller will receive signals from a distance of more than 500ft in open air and
more than 100ft in the presence of obstructions. The RF transmission frequency is
433.92MHZ.
The GC274B may be programmed with up to 20 compatible remote modules. If an
additional module is programmed it will replace the most recently programmed module.
The previous 19 modules will remain unchanged.
The command to retract the awning can be initiated by turning on the ignition switch or
by releasing the parking brake depending upon how it is installed.
This module will cause the awning to retract when the vehicle prepares to move and
then remove power to the awning so that it cannot be redeployed while the vehicle is in
motion.
FWD
STOP
REV

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Girard Systems GC274B and is the answer not in the manual?

Girard Systems GC274B Specifications

General IconGeneral
BrandGirard Systems
ModelGC274B
CategoryControl Unit
LanguageEnglish