What to do if my GIRBAU Folding Machine won't start?
If your GIRBAU Folding Machine won't start, it could be due to several reasons. First, check if any of the motor-circuit breakers or a safety device has been engaged. If so, reset the circuit breaker and investigate why it tripped. Also, ensure that all emergency stops are released and that the movable covers are properly closed.
Why is there no primary folding on my GIRBAU Folding Machine?
If your GIRBAU Folding Machine is not performing primary folding, consider these possible causes and solutions: * If the machine has stopped, try flicking the main switch, pressing the Start key on the general control panel, and resetting the machine. * Check the machine's air supply and the compressed air circuit to ensure there's adequate air pressure. * Inspect the folding machine cell input (input test) for any measurement problems. * Examine the machine's OPG or OPGs (OPG test) for measurement issues. * Verify that the selected program is not a Bypass program without folding; if it is, change the program. * Test and replace the outputs if the blowing valve and blade control outputs appear defective.
Provides crucial warnings and safety precautions for machine usage.
Instructions for safe handling and lifting of the machine.
Steps for correctly positioning and setting up the folding machine.
Procedures for checking and levelling the machine after installation.
Requirements and procedures for connecting the air supply.
Guidelines for safe and correct electrical installation.
General safety guidelines and emergency stop procedures.
How to safely stop the machine and secure it.
Rules for safe intervention while the machine is operating or stopped.
Daily, weekly, monthly, and yearly maintenance tasks.
Common malfunctions, causes, and solutions.
General| Brand | GIRBAU |
|---|---|
| Model | FL-KING |
| Category | Folding Machines |
| Language | English |
To Next Page
