GIRBAU HS-4022 User Manual

Cod. nº 407817
Rev. nº 01/0403
Manufacture date
Fecha fabricación
Date fabrication
Serial No.
Nº Fabricación
Nº Fabrication
ÇÇ
Notice
d'Instructions de
Fonctionnement
pour Laveuses
Versions Contrôle
PM
Manual de
Instrucciones de
Funcionamiento
para Lavadoras
Variantes Control
PM
Operation
Instructions
Handbook for
Washers
Control Version
PM
PM
Manufacturer
Fabricante
Fabricant
Dealer stamp
Sello distribuidor
Cachet distributeur
Ctra. de Manlleu, km. 1
08500 VIC (Barcelona) - SPAIN
Tel. (34) 93 886 1100
Fax (34) 93 886 0785
E-mail: girbau@girbau.es
http://www.girbau.com
GIRBAU, S.A.GIRBAU, S.A.
HS - 4007 800001
HS - 4012 810001
HS - 4022 830001
HS - 4040 850001
HS - 4055 860001
HS - 4110 870001
MODEL FROM MACHINE No.
MODELO A PARTIR MAQUINA Nº
MODELE A PARTIR MACHINE No.

GIRBAU HS-4022 Specifications

General

Brand	GIRBAU
Model	HS-4022
Category	Washer
Language	English

Summary

Safety Instructions

General Safety Warnings

Essential safety guidelines for operating the washing machine, covering reading instructions, safe use, and compliance with standards.

Hazard Symbols

Explains hazard symbols used on washer labels and in the instruction handbook for user safety and awareness.

Operation

Don'ts

Microprocessor Control and Configuration

Machine Configuration Options

Explains how to configure machine options for installation and operation needs, including water, heating, and inverter settings.

Operation Configuration and Modification

Manual Mode Operation

Automatic Mode Use

Automatic Mode Programming

Programming a Programme

Detailed guide on programming a new wash cycle, including water inlet, level, and temperature settings.

Optional Functions Programming

Error Report

Information on error codes displayed by the machine, their probable causes, and recommended solutions.

Hazards and Prevention Measures

Mechanical Hazards

Identifies mechanical risks like entanglement, crushing, and structural issues, with corresponding prevention actions.

Electrical Hazards

Details risks associated with electrical circuits, components, and potential shorts or overloads, with safety measures.

Thermal Hazards

Covers risks of burns from contact with hot machine surfaces and steam exhaust, with necessary precautions.

Hazards from System Failures and Missing Safety Measures

Covers risks related to power failures, component breakdowns, missing guards, and emergency device issues.

Maintenance

Preventive Maintenance Schedule

Outlines user and technician maintenance tasks, ensuring proper operation, safety, and machine longevity.

Alarm Reports and Troubleshooting

Provides a guide to understanding machine alarms, probable causes, and troubleshooting steps for common failures.

Corrective Actions and Cleaning Procedures