Need help?Do you have a question about the Gitzo Mini Traveler and is the answer not in the manual?
Open the 3 tripod legs as shown in figure 1.
Each leg can be set at 2 angles of spread using the pull&fix system.
Mount the camera on the tripod head using the 1/4" screw.
Lock/release the ball head movement using the gear knob for camera positioning.
Instructions on how to remove the head and reassemble it using specific screws and adapters.
Tighten tripod legs using a TORX key to maintain desired friction.
General| Purpose | Digital/film cameras |
|---|---|
| Mounting | 1/4\ |
| Product color | Black |
| Number of legs | 3 leg(s) |
| Number of leg sections | 1 |
| Maximum weight capacity | 3 kg |
Weight and Dimensions| Weight | 265 g |
|---|---|
| Height (max) | 175 mm |
| Height (min) | 125 mm |
To Next Page
