EasyManuals Logo

GL Technologies GL.iNet Slate GL-AR750S-Ext User Manual

GL Technologies GL.iNet Slate GL-AR750S-Ext
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Choose a SSID from the drop-down list and enter its password. You can also enable the Remember button
to save the current chose wireless network. Finally, click Join .
3) USB 3G/4G Modem
You can connect to the Internet using a USB 3G/4G modem. Insert your SIM card into the USB modem. Plug
the USB modem into the USB port of the router. Once it has been detected, the 3G/4G modem section will
be activated and you will be able to set up your USB modem.
Be aware that some modems work in host-less mode, which have to be configured through Tethering but
not 3G/4G modem.
In general, you can set up your 3G/4G modem by the three basic parameters below. Click Apply to
connect.
Device: Choose /dev/cdc-wdm0 if your modem supports QMI, otherwise you need to choose
/dev/ttyUSB, which may include several ttyUSB from 0 to 3. You need to choose the correct one based
on the modem spec. We suggest you to try ttyUSB0 first.
Service: Indicate the service type of your SIM card.
APN: Confirm with your SIM card carrier.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GL Technologies GL.iNet Slate GL-AR750S-Ext and is the answer not in the manual?

GL Technologies GL.iNet Slate GL-AR750S-Ext Specifications

General IconGeneral
BrandGL Technologies
ModelGL.iNet Slate GL-AR750S-Ext
CategoryWireless Router
LanguageEnglish

Related product manuals