Need help?Do you have a question about the GL Technologies GL.iNet Slate GL-AR750S-Ext and is the answer not in the manual?
General| USB Ports | 1 x USB 2.0 |
|---|---|
| RAM | 128MB |
| Power Supply | 5V/2A |
| Operating System | OpenWrt |
| Model | GL-AR750S-Ext |
| Wireless Standard | 802.11a/b/g/n/ac |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Flash Storage | 16MB |
| Antennas | 2 x External antennas |
| MicroSD Card Slot | Yes |
| VPN Support | Yes |
| Wireless Speed | 733Mbps (300Mbps(2.4G)+433Mbps(5G)) |
Plug the Micro USB power cable into the router's power port using a standard 5V/2A adapter.
Connect your device to the router's LAN port using an Ethernet cable.
Connect your device wirelessly to the router using its SSID and password.
Select the desired display language for the router's web Admin Panel.
Set a new administrator password for the web panel, at least 5 characters long.
Access the router's web interface to check status and manage settings.
Connect the router to the internet using an Ethernet cable.
Extend an existing wireless network by connecting the router to it.
Connect to the internet using a compatible USB 3G/4G modem.
Share internet connection from a smartphone or USB modem via USB.
Connect the router to a modem or main router via Ethernet cable for internet access.
Connect to an existing wireless network, typically in hotels or cafes.
Connect to the internet using a USB 3G/4G modem after inserting a SIM card.
Lists tested modems and notes their compatibility modes (QMI, Host-less).
Share smartphone or USB modem internet via USB cable, also for host-less modems.
Configure the name of the Wi-Fi network; avoid unicode characters.
Set the Wi-Fi password, which must be at least 8 characters long.
Manually select the Wi-Fi channel for optimal performance.
Adjust the Wi-Fi signal strength; default is 20 (Strongest).
Manage connected clients, view their IP/MAC, and block unwanted devices.
Check for and download new firmware versions automatically when connected to the internet.
Manually upload a firmware file to the router using the provided interface.
Download official firmware releases from the GL.iNet website.
Instructions for compiling and flashing custom firmware for advanced users.
Enable automatic firmware updates at a scheduled time for convenience.
Manage and install OpenWrt packages to extend router functionality.
Configure sharing of external storage device contents via LAN or WAN.
Change the web Admin Panel password, requiring the current password for security.
Change the router's LAN IP address if it conflicts with the main router's IP.
Set the router's time zone to accurately record activities and logs.
Clone a client's MAC address for network access, useful in restricted environments.
Configure DNS server settings to prevent leaks or use custom DNS providers.
Configure the function of the mode switch button, e.g., toggle VPN clients.
Change router mode (Router, AP, Extender, WDS) for different network scenarios.
Revert the router to factory default settings, erasing all configurations and data.
Access the Luci web interface for advanced configurations and system logs.
To Next Page
